Browse all practice questions for the American Airline Initial Ramp Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

American Airlines Ramp Exam 2026 – Complete Preparation Guide course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • When must the post arrival walk around be completed?
  • What should be done immediately after initializing the flight?
  • What is a key safety procedure during pushback operations?
  • During a yellow alert, what must never be used?
  • How many feet away from the aircraft should a brake safety check be performed?
  • How do you mark a bag as "heavy" on the scanner?
  • What is the commodity code for local mail?
  • According to ramp operation commands, what does "turn to your right" indicate?
  • What distance defines the jet blast zone for all American aircraft?
  • Where are the chocks typically placed during normal weather conditions?
  • What arm should be extended to move the aircraft to the left?
  • What is required when handling cargo that must not be broken down?
  • What should you do if you receive a bomb threat at work?
  • What is the minimum distance necessary between a live animal and RAM?
  • How can you identify which tower to use on each aircraft type?
  • What command is used when there is a requirement for the air supply unit?
  • What is the correct action if the aircraft requires an airstart?
  • What is essential for ensuring compliance when loading cargo?
  • What is essential to do before commencing the loading process?
  • Which statement is true regarding ground power and PCA supply on incoming aircraft?
  • What does "Set Brakes" instruct personnel to do during ramp operations?
  • What action should be taken if wind speeds reach 30 Knots (35 MPH)?
  • What is the function of the compartment drop down on the scanner?
  • Why is Eye Contact important in hand signaling?
  • Where should safety posts/cones be placed for a narrow-body aircraft?
  • What type of bag in DFW corresponds to the commodity code BO?
  • What should you do if you identify an unauthorized person on the ramp?
  • What does the phrase "Clearance to Depart" typically signify?
  • What is typically announced when ready to start engines?
  • What is the minimum PPE required while working on the ramp?
  • When should personnel expect to receive communication indicated by "Want Interphone or Talk"?
  • Where can you access the local station emergency plan?
  • How many baggage carts or dollies can be pulled in a string around aircraft?
  • What is the action to take when a vehicle needs to stop safely?
  • Which engine is denoted as Engine #1 based on the reference provided?
  • What does a "Gate Hold" signal during ramp operations?
  • Which of the following is a Pre-Departure duty?
  • What is the primary purpose of placing safety cones on the ramp?
  • Which of the following is NOT a scanning operation?
  • What should ground crew ensure when they receive "Clearance to Depart"?
  • If you see someone without a badge on the ramp, what should you do?
  • What is the instruction sign that means to "move straight ahead"?
  • Which statement best describes the purpose of disconnecting external power?
  • What does it mean when the flashback flashes the nose gear light three times?
  • What is the maximum speed limit on service roads in ramp operations?
  • What is the maximum wind speed before high winds procedures are initiated on the ramp?
  • If the red limit line is exceeded during pushback, whom should you contact?
  • At what times must hand signals be given with night (lighted) safety wands?
  • What is the primary command to indicate aircraft readiness for movement?
  • Where is the APU emergency shut down on the B737 aircraft?
  • Which command would you give to the crew when requiring additional personnel for ground support?
  • Where is the APU emergency shut down located on the A320F aircraft?
  • Which command indicates to "attract attention" during ramp operations?
  • What type of bag in PHX corresponds to the commodity code BE?
  • How often should emergency exits be checked for functionality during ramp operations?
  • What method is used to scan a wheelchair onto the aircraft?
  • If there is any doubt when wing walking, what signal should be given?
  • In which scenario would you request air supply units?
  • What type of bag is identified as an interline bag in ORD?
  • What does the command "turn to your left" signify in ramp instructions?
  • What does the term "Confirmation" refer to in hand signaling?
  • What does the acronym PPS stand for in the context of airline operations?
  • What is the purpose of connecting external power to an aircraft?
  • What should be done after the engines are successfully started?
  • High winds procedures begin at what wind speed?
  • When handling a leaking bag, what is the first step you should take?
  • When is it appropriate to confirm the installation of chocks?
  • What command is important just before an aircraft is scheduled to depart?
  • What is an important safety measure before starting the engines?
  • What is the refusal code if a shipment is not received at the gate?
  • Which component must be inspected before towing an aircraft?
  • Who should you refer all requests for information from the media to?
  • What is the general expectation if a shipment is declined upon arrival?
  • What action should be taken during a yellow alert?
  • Once loading a flight is completed, what must be pressed to finalize the process?
  • Which command indicates a need to cease engine operation?
  • Which type of cargo has the highest loading priority?
  • What must occur before entering the ingestion zone?
  • Where should gate delivery items be loaded on an A321 aircraft?
  • Which option should be used when logging issues with a bag?
  • What does a red alert require you to do?
  • Which of these actions should follow the signal "Set Brakes"?
  • Before guiding an aircraft, what is essential for safety on the ramp?
  • What safety practice relates to managing electrical power effectively at the ramp?
  • During which phase of operation must the towbar be correctly matched to the aircraft type?
  • What should you do if a skid cannot be accommodated on the flight?
  • What is the role of the bypass pin in aircraft ground handling?
  • What is the purpose of the Anti-collision beacon?
  • How many agents are required to be present at the gate when DGS is used for arrival?
  • How can personnel identify which type of towbar to use on each aircraft type?
  • Which aircraft does not utilize the GBU support strap?
  • What is the primary action indicated by the phrase "Release Brakes" in ramp operations?
  • Which signaling is used when additional personnel are needed for a safe departure?
  • Who must give permission prior to disconnecting the GPU?
  • During low visibility conditions, what should be measured to ensure safety?
  • What does "RATE OF CLOSURE" primarily concern in ramp terms?
  • What is meant by "Area Clear Right Wingwalker"?
  • What role does Exaggeration play in hand signals for ramp operations?
  • During which operational period should ramp vehicles be checked for functionality?
  • Where should personnel be positioned when an aircraft is operating?
  • Potable water must be serviced during every:
  • Where is the Ramp Air Turbine (RAT) located on an A320F aircraft?
  • What action is taken to ensure a safe departure once the engine is running?
  • What is the target of arrow D as per the provided information?
  • What is the commodity code for priority bags?
  • Which command should be executed to secure the aircraft for departure?
  • Which of the following should be prioritized when loading baggage?
  • What does it indicate if the flight deck flashes the nose gear light one time?
  • What immediate action should be taken if the brakes fail during pushback?
  • What important aspect is communicated through the signal "Want Interphone or Talk"?
  • What action should be taken if ground support equipment is not functioning properly?
  • What are two things that must be completed prior to hooking up a tower to an aircraft?
  • How does "Gate Hold" impact the aircraft's readiness for departure?
  • What is a "Three-Way" connection used for in ramp operations?
  • What command indicates activation of a backup start system?
  • Who needs to be notified when a battery-powered wheelchair is loaded onto the aircraft?
  • What does the red limit line on the nose gear door or fuselage indicate?
  • When can nose gear chocks be removed from the aircraft?
  • What is represented by arrow E in the context given?
  • If a bag is leaking, who should you notify?
  • Ground Power and Pre-Conditioned Air (PCA) is supplied on every arriving aircraft, except for which model?
  • What term is used to indicate the speed of a closing process or distance?
  • What does "DGS" stand for in ramp operations?
  • What is the commodity code for eagle bags?
  • What is indicated by arrow F in the mentioned figure?
  • Under normal circumstances, where would you place the airstart for an A320F aircraft?
  • When is it appropriate to communicate aircraft movement intentions to the flight deck?
  • During pushback, in which gear must the tractor be operated?
  • Which bags must be placed on the local baggage claim belt first?
  • If a package needs a specific code for local processing, what should that code be?
  • How many baggage carts or dollies are allowed in a string around a wide body aircraft?
  • Which of the following is NOT one of the four components necessary for a "good hand signal"?
  • What should you do with a gate delivery bag at the arrival station?
  • Which command is used to stop the airstart procedure?
  • What is the ingestion zone defined for all American aircraft?
  • What type of aircraft requires an electric start when the APU is inoperative?
  • When should a ramp vehicle be inspected by the operator?
  • Before the towbar and bypass pin can be removed, what must be set after pushback is completed?
  • What component is identified by arrow C in the provided figure?
  • What role does the CARE team provide in relation to passengers?
  • In what position must an HR bee be placed on a belt loader?
  • When a skid is not accommodated, what is the correct procedure?
  • What is the commodity code for local bags?
  • What does the command “USE THIS GATE” indicate during ramp operations?
  • What is the key feature of the approach pattern for loading wide body aircraft?
  • What should be done if a towbar becomes disconnected during an aircraft movement?
  • When are seatbelts required to be worn while using ground support equipment (GSE)?
  • What side of the aircraft is indicated by the reference to arrow B?
  • What signifies that the engines are prepared for startup?
  • Before disconnecting ground power and PCA, who must you request permission from?
  • What type of instruction would "slow down" likely represent on the ramp?
  • What does the command "remove chocks" signify?
  • Where is the APU emergency shut down located on the B777 and B737 aircraft?
  • What must be installed before connecting a tower to an aircraft?
  • What is the first step to ensure the aircraft is immobilized on the ramp?
  • What is the primary function of the main gear chocks?
  • What is the speed limit in the safety envelope on the active ramp?
  • On which side of the aircraft is engine #2 located?
  • Which indication confirms that the aircraft is secured from moving?
  • At what distance must a full stop be made when crossing the safety clearance lines?
  • What is the primary purpose of using hand signals during ground operations?
  • What step is crucial before an aircraft can be pushed back from the gate?
  • What is the primary focus during a red alert?
  • When is it permissible to give out a passenger list?
  • Which flight number is noted for receiving additional screening?
  • Once an engine has started at the gate, what is the next step if the aircraft has an inoperable APU and requires an airstart?
  • What indicates the aircraft requires immediate attention due to fire?
  • What does the command "engine fire" indicate?
  • Which team member is primarily responsible for overseeing the pushback process?
  • How many agents are required to hook up a tower to an aircraft?
  • Which area typically requires inspection prior to aircraft departure?
  • What does the action of "Want Electrical Power Unit" suggest?
  • What approach pattern should be used for loading and offloading narrow body aircraft?
  • What must be done prior to closing the aircraft bin door?
  • What process should be confirmed before indicating an aircraft is ready to tow?
  • What does the term "Wheels Chocks Away" indicate?
  • How far out should safety cones be placed on all wide-body aircraft?
  • What should personnel understand from "Area Clear Left Wingwalker"?
  • What does it mean when the flight deck flashes the nose gear light one time?
  • What is the next step after disconnecting external power?
  • What should be done if the engines are running while chocking the aircraft?
  • What must be confirmed before removing the main gear chocks?
  • Which of the following actions must be taken when preparing for pushback?
  • What is the first action to take after logging into the scanner for a flight?
  • What does the acknowledgment signal from the flight deck during pushback typically entail?
  • What is the standard procedure if equipment is found unserviceable after inspection?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy